Greiner Industries’ 450,000 sq. ft. Facility, Mount Joy, PA
Greiner Industries’ Main Office Building, Mount Joy, PA
Greiner has grown by leaps and bounds since the business began in 1976.
What started as a welding business in a one-car garage in Mount Joy, PA has now grown into a massive steel fabrication facility with over 450,000 square feet of work area under roof and 140-ton maximum lifting capacity – and just a few miles from where the one-car garage once stood. Our location also gives us convenient transportation access to major highways throughout the Mid-Atlantic.
Fabrication Shop
- Primary fabrication bays 80-ft wide x 600-ft long
- 140-ton maximum lifting capacity with 31-ft hook height of all overhead cranes
- Girder Builder – able to fit and weld Girders up to 12ft deep by 150ft long and weighing up to 140-tons
- CNC Drill Line – able to drill & cope I-beams up to 40″ high by 750 lbs/foot
- SubArc Welding Manipulator with 19′-4″ reach by 20ft lift and fully integrated 30-ton tank turning rolls – can turn up to 25-ft diameter
- 30-ft x 50-ft leveling bed permanently installed in shop floor
- Forklifts with up to 55,000-lb lifting capacity
Machine Shop
- CNC Gantry type Double Column Machining Center – 10ft by 66ft table with 140″ working height and 120-ton weight capacity
- Custom-built CNC Vertical Turning Center (VTC) with 13ft dia. table and 80-ton weight capacity
- CNC horizontal boring mill with a 12-ft high x 30-ft long machining envelope
- CNC drilling – 10-ft x 10-ft drilling area
- CNC machining centers
- 50-ton maximum lifting capacity and 31-ft hook height of overhead cranes
Rolling & Forming Highlights
- Can Roll up to a 8-1/2″ thick 50,000 psi x 13.33-ft wide plate -OR- a 5-1/2″ thick 100,000 psi x 13.33-ft wide plate to a 100″ diameter
- Can roll up to a W24” beam the hard way (X-X axis) and up to 36″ beam the easy way (Y-Y axis)
Cutting
- 5-axis waterjet cutting system – 14-ft wide x 40-ft long x 60” high cutting envelope
- Laser cutting system can cut up to 5/8” thick stainless steel and 3/4″ thick carbon steel plate.
- CNC dual-gantry 400amp high-definition plasma with tool changers – 14-ft wide by 127-ft long down-draft table.
- Can cut up to 5” thick carbon steel plate
- Can cut up to 6-1/4” thick stainless steel plate (on a separate 800amp cutting system)
- CNC 5-Axis Pipe Cutting System – 2” to 36” pipe diameter by 1-1/2″ max. wall thickness by 42ft max. length.
- CNC Anglemaster – Cutting and Punching Flat Bar and Angles – up to 8” x 8” angle x 1” thick
- Beam Splitter – Rotary Shear cuts I-beams into tees
Industrial Blasting & Liquid Coatings
- 500-ft long environmentally compliant facility
- 100-ton “four-point pick-and-carry” crane system that runs the entire length of the facility
- 100-ft long heated staging area
- 100-ft long steel grit blast booth
- Three separate 200-ft long coating booths
Metalizing (Thermal Spray)
- 40,000 square foot environmentally compliant facility
- 70-ton overhead crane system
- Wheelabrator Blaster
- Dedicated blast booth for metalizing only
- Four operators can be metalizing at the same time
Assembly/Yard Area
- Secure, compacted stone lay down area
- Utilized as assembly and storage yard
Crane Rental Service
- Located in Mount Joy, PA
- Licensed in PA, DE, MD and Washington, D.C.
- 24/7 operator and crane availability
- Hydraulic all-terrain and truck cranes
- 45-ton to 600-ton lifting capacity
- Boom lengths up to 478.3-ft
- Additional lifting equipment
- Transport, escort and rigging services
